Step by Step Instructions to dry clean your carpets.
Prepare for a 6ft X 6ft area at a time. Lightly apply Nybakke PreCleaner from waist height. Just put a good fog or mist down as the PreCleaner is setting up the carpet for for the powder.
Brush the PreCleaner in with the SEBO. This agitates the PreCleaner into the carpet pile with it’s two counter revolving brushes. This step is very important as it breaks up heavier dirt, soil and stains and actually enhances the ability of the Riccar Dry Carpet Cleaner to absorb as much as 35% better than not brushing the PreCleaner in first. Concentrate on heavier soiled traffic lanes and spots with brushing the carpet pile in different directions.
Sprinkle a sifter full of Capture Dry Carpet Cleaner onto the 6ft X 6ft area that you just brushed the PreCleaner into. Sprinkle heavier amounts in soiled and over spotted areas. Then lighter amounts in non-traffic areas.
Repeat Step One through Four until you have finished all the carpet area where you want to clean. Remember you don’t have to move heavy furniture as your furniture will not be setting in a wet carpet.
Wait at least 60 minutes for the Capture Dry Carpet Cleaner to dry completely out so that it can be thoroughly vacuumed out of the carpet. You may leave the powder on the carpet as long as you choose and vacuum at your convenience. You can even walk on the carpet with the Capture Dry Carpet Cleaner in the carpet.